Green Walls & Vertical Gardens

Artificial green wall panels are interlocking foliage tiles that clip together to cover a wall in dense, maintenance-free greenery. They mount to almost any flat surface, trim to fit around sockets and corners, and are used for feature walls in restaurants, retail fit-outs, offices, event backdrops and residential courtyards where a living wall would need irrigation and a maintenance contract.

How do you install artificial green wall panels?

Panels join edge to edge and fix back to a substrate, so most of the work is in the surface behind them rather than the greenery itself. On a solid wall, batten out a light timber or plywood backing, fix the panels to that, and you get both a flat plane and an air gap. Straight onto fencing, panels can be attached to the rails with cable ties or with screws and washers. Cut panels to size at the edges and rotate them as you go - laying every tile the same way up produces a visible grid, and staggering the orientation is what makes a wall read as planting rather than tiling. Finish the perimeter with a batten or trim so no cut edge stays visible.

Do artificial green walls work outdoors?

Outdoors is one of the main uses, on two conditions: that the panels are specified for exterior placement, and that the wall behind them can get wet and then dry out again. Foliage in full sun fades over time on any product, so darker, mixed-tone panels hold their appearance better than bright uniform greens. Leave an air gap behind the panels rather than sealing them flat against rendered masonry, and check that water can drain away at the bottom of the run. Check each listing for what that panel is rated for. See UV Resistant and Outdoor Safe.

How to choose the right size

Work in area, not in panel count. Measure the height and width of the wall, multiply for square metres or square feet, divide by the coverage figure on the product listing, then add roughly ten to fifteen percent for cutting waste and edge trims. Order the whole run at once so the foliage batch matches, because greens vary slightly between production runs and a wall finished months later can show the join. To soften a hard rectangle, break the base line with planting. Browse Grasses, Ferns and Shrubs and Commercial Artificial Plants.

Frequently asked questions

Do green wall panels for a restaurant, retail or office feature wall need to be fire-rated?

It depends on your municipality, occupancy type and where in the space the wall sits. In Canada, fire officials generally reference CAN/ULC-S109; in the US, NFPA 701 is the common benchmark, and testing methods and compliance rules differ by jurisdiction. Ask for documentation from anyone you buy from, including us, and confirm the exact requirement for your project with your landlord or local authority having jurisdiction before specifying panels for a commercial feature wall.

How do you clean dust off a mounted green wall panel?

A vertical wall of dense foliage collects less dust than a horizontal surface, since there is nothing for it to settle flat on, but it still needs occasional attention. A leaf blower on a low setting or compressed air worked from top to bottom clears most build-up without touching individual leaves. For an outdoor wall, a garden hose on a gentle setting rinses it clean. Avoid pressure washers, which can dislodge foliage from the backing mesh.

How long do artificial green wall panels typically last before they need replacing?

Indoors, out of direct sun, panels generally hold their colour and shape for years with only occasional cleaning, since there is no UV exposure or weather to degrade them. Outdoors, lifespan is set mainly by sun exposure: a wall in full, unshaded sun will show fading and stiffening sooner than one in a shaded or north-facing position. Choosing a panel rated for outdoor use, rather than an indoor-grade one, is the single biggest factor in how long an exterior wall stays looking fresh.

How does a faux green wall compare with a living green wall or moss wall?

A living green wall needs an irrigation system, a lighting plan if it is not near a window, and an ongoing maintenance contract to replace plants that fail, which is a running cost most projects underestimate. A moss wall looks striking but is a static, preserved product that cannot be trimmed or reshaped once installed. A faux panel wall needs none of that upkeep, can be cut and reconfigured on site, and looks the same in five years as it did on install day.

Do the panels come with mounting hardware, or do I need to buy that separately?

This varies by product, so check the individual listing details before ordering. Some panel sets include clips or ties for joining panels edge to edge; the backing, battens, screws or cable ties needed to fix panels to your specific wall or fence are typically sourced separately, since that depends on what surface you are mounting to. Plan the backing and fixings as part of the project budget rather than assuming everything needed arrives in the box.